Clubman Premium 2 Piece front end –  Standard

Description Clubman Premium 2 Piece front end –  Standard This fibreglass 2 piece front end is manufactured from all new plug and tooling. The front end has been made on a complete clubman body shell with the A panel to wing seam removed and smoothed. The front end has extended inner wing closing panels so if fitting the front to an original round front mini the gap created at the rear of the bonnet due to the different widths is now enclosed with the last 150mm able to be utilised as a fixing point to the car body. The rear edge of the A panel/door aperture has a clean moulded edge that makes for easy alignment and can be trimmed smaller once fitted to allow the door to open past. The under bonnet/inner wing top areas are moulded around the edges giving addition strength but may be trimmed to suit around other engine transplant conversions. The front end is made from multiple piece moulds allowing the front to retain the original clubman style and lines making the fitting simpler. The front end is supplied with the Standard bonnet, please see other listings for more bonnet choices. The front end is supplied in white gel-coat to be painted. All of our Mini products are manufactured from original moulds or from original products from the 1960’s onwards meaning that these moulds are now very well used after producing hundreds of panels over the years. This means that the mould finish may not be as it once was, and therefore the products will require preparation prior to paint. As every Mini is slightly different, and most are far from original with new panels fitted over the years, we must state that all of our products will require first fitting, with sanding/shaping to fit prior to final fitment and paint. We therefore recommend that all of our panels are for fitment by a competent body shop professional. If you are not OK with this, please do not proceed. Related